HA-981 SMART CONTROL PANELS - HOW DO THEY WORK TO PROTECT YOU

HA-981 are designed for home and office protections using the latest security concept. Each system is built-in with data communicator and voice auto-dialer in one unit. When alarm occurs, it gives local alarm warnings as like the traditional alarm systems as well as sending out the alarm status information to the monitor station and voice message and/or numeric message to the pre-set telephones and/or personal pagers. As the system reports the alarm event through different media to the appropriate parties, which guarantees that no alarm reporting will be lost in an alarm event even one of the parties is not on duty. The HA-980 control panels are compatible with all kinds public telephone systems.

HA-981R-C ---- 6-ZONE ALARM SYSTEM COMPLETE KIT WITH COMMUNICATOR & AUTO-DIALER
	Alarm Kit Comprises: 6-Zone Alarm Control Panel With Remote Control Console HA-981R 2 x Mini PIR Detectors PIR-9038W 1 x Electronic Siren ES-12W 1 x Panic Emergency Button PB-01 5 x Magnetic Reed Switches MC-01 1 x AC Power Adaptor 230V 3 Amp AP-980 1 x Nextved Backup Battery, 12V 1.2AH, Sealed Lead Acid, Maintenance Free Nextved NHGL1.2-12

THE MAIN FEATURES OF THE COMMUNICATOR & DIALER IN HA-981

The main features of the Communicator & Auto-Dialer in all HA-9XX Alarm Control Panels are exactly the same.

• Two 32 Digit Telephone Numbers for Communicator
• Four 32 Digit Telephone Numbers for Auto-Dialer
• Tone Dialing (DTMF) or Pulse Dialing with 3 Break Make Ratio Options
• Communicator Data in DTMF Format with Check-Sum
• Remote Arm-Disarm the Alarm System or Call for Status from Any DTMF Telephone or Mobile Phone
• Programmable Pause Time between Any Digits - A key Function in Making Contact with the Auto-Pager Station
• Conditions for Sending Status Report from Communicator
  1. Alarm Occurs
  2. System Status Change
  3. Alarm System Armed
  4. Alarm System Disarmed
  5. Periodic Report
  6. Station or Authorized Party Call for status
• Auto-Dialer is Programmable with Voice Message and Numeric Message for Auto-Pager Calling
• 20 Seconds Non-volatile User Re-Programmable Voice Message
• Controllable & Prolongable Listen-in Duration
• Back-Up or Non-Back-up Dialing for Alarm Reporting
• Automatic Faulty Telephone Line Detection at Alarm Arm-Disarm Control
• Programmable of Dialing Attempts or Dialing Until the Line is Through for Communicator, 8 Attempts Maximum
• Programmable of Recorded Message Repeats, 8 Repeats Maximum
• Selection of Communicator & Dialer Calling Combinations
• Periodic Report Interval Time Options
• Telephone Numbers in Communicator & Auto-Dialer Can Be Tested Individually
• Use the Existing Telephone Line, No Additional Line is Required
• Compatible with All Kinds of Public Telephone Systems & Those PBX Systems Using Standard Telephone
• 6-Zones, Programmable for Instant, Delay 1 or 2, 24 Hour Instant or 24 Hour Silent Alarm Reporting
• Programmable Master Code, Client Code & 8 User Codes
• All User Codes are with Duress Function
• Protection Zones are Programmable for Single or Multiple Triggering for Noise Pollution Regulations
• Programmable Time for Exit Delay, Entry Delay 1 & 2, and Alarm Duration
• Store the Habitually Isolated Zones in Memory or Manually Set Zone Isolation are possible for Home Mode Operation
• Home and Away Operations
• Forced to Arm or Arm Prohibited Options
• Instant - Delay Zones Handover/Non-Handover Operation Options
• Power Low Watchdog Resets the System before Battery Exhausted
• Non-Volatile Memory
• Remote Arm-Disarm by conventional Key-Switch is Possible, Good for Those People Do Not Like Codes
• Factory Set Full Feature Default Values in System for Ready Use
• Full Memory for Alarm Event Zone(s)
• Connection Facilities for Siren/Bell, Satellite Siren and Strobe Light
• Arm-Disarm by the On-Board Keypad or Remotely from Any DTMF Telephone or Mobile Phone
• Programmable Response Time for Each Protection Zones
• Arm-Disarm Ring Back Options
• Exit and Entry Beep Enable-Disable Options
• Instant Arming Codes for Home or Away Operation
• Built-in Dynamic Battery Charger and Tester
• Dynamic Battery Testing Can Be Performed by the User Anytime or Automatically
• On Board Activation of Panic and Duress
• Able to Take Up to 3 Remote Keypads
• Tamper-Proof with Independent Zone
• Remote Keypad Can Be Fitted in a 2-Gang Electrical Box

SPECIFICATIONS