| Our new DL50/K domestic loop amplifier kit includes everything you need to create a high quality induction loop system for a bedroom, living room, TV lounge or study. Carefully designed to sit discreetly alongside all types of audio-visual equipment, the amplifier features one set of phono inputs (for direct connection to television sets, etc), two microphone inputs and an alert input (for connection to fire alarms, doorbells, etc). Screwdriver-adjustable drive, level, mix and tone controls are provided, allowing the system to be tailored to suit the exact requirements of any room, with installation further aided by the provision of an output current meter, an input peak LED and an easy-to-follow installation guide.
• Ideal for bedrooms, living rooms, TV lounges, studies and other domestic applications
• Kit includes a DL50 induction loop amplifier c/w plug-top power supply, 33m of loop cable*, a SCART-to-double-phono audio connection lead and a microphone
• Attractively-designed amplifier provides max. square room coverage of 50m2 (7m x 7m) or max. rectangular room coverage of up to 100m2 (5m x 20m)*
• Connections provided for two 3.5mm electret microphones (one mic. is provided in the DL50/K kit) and one SCART-to-double-phono audio lead (alternative leads are available for purchase if required)
• Simple to adjust, tamper-resistant drive, level, tone and mic. priority controls
• Input peak, output current, signal present and power on LEDs
• Alert tone input for doorbells, fire alarms, security systems, etc.
• Automatic compressor limiter
• Full 2. drive current capability for increased coverage at higher frequencies
• Fully compliant with EN60118-4 (formerly BS6083) and BS7594:1993
* Longer lengths of loop cable may be required for rectangular rooms.
| DL50/K TECHNICAL SPECIFICATION | | POWER REQUIREMENTS | 12V a.c. 1.5A max (via plug-top power supply)
| | MAX. COVERAGE AREA | 50 square metres (7m x 7m)
| | CONTROLS | Input signal level control
Tone control (boost +16dB; cut -20dB at 1KHz)
Loop signal control
Microphone priority control
(all controls are screwdriver adjustable and recessed to avoid tampering)
| | INDICATORS | Power on (green)
Input signal (red)
Loop strength meter (green to yellow to red)
| | INPUTS | Two 3.5mm mono microphone inputs with phantom power
Two phono (line level) inputs (for connection of the SCART to double phono lead supplied)
Alert trigger input - normally open (close to trigger)
| | OUTPUTS | One loop output (via push-and-hold connector) - only use the loop cable supplied.
One headphone output (confirms audio input signal level)
| | DIMENSIONS | 40mm (Height); 85mm (Depth);185mm (Width)
| | WEIGHT | 550g (amplifier only)
| DL50-kit compromise: - DL50 Free standing Loop Amplifier
- AMT microphone
- APS scart lead
- Loop cable
| 
Bookmark this page: Click here! 
